As you know, cart batteries last for a limited period before it becomes necessary to replace them. Sometimes, it can be impossible, and the question of how to hit a vape cart without a battery arises.
Sometimes, finding a compatible battery can be challenging. On the other hand, an Android or iPhone charger cord, laptop USB port, or wall charger use is technically possible, but you may wonder whether it is the best solution.
How to Hit a Vape Without A Battery?
You have at least two ways to hit a vape cartridge when the battery is empty. However, some vapers have developed a few imaginative ways for this purpose. Even though some of these options sound interesting, never rely on them too often.
1. Android charger cord
Using an Android charger cord when the vape battery fails or becomes empty is one of the most convenient ways to keep your device usable. They are an excellent solution because their wiring is simple and user-friendly.
Even though the procedure looks effortless, uncomplicated, and technically acceptable, you should be careful. There is still no proven confirmation that hitting a vape cart this way is entirely safe.
Material
- USB C or USB 3.0 Android cable with a USB port
- Rubber stripper
- Wire cutter, pliers, or nail clippers
- Power bank, computer, laptop, or charging adapter
Instructions
You need the original Android phone cable for this action. Since you need to destroy it for this purpose, it is necessary to choose one you no longer use.
Unplug the USB cable, cut off the end placed opposite the USB port, and insert it into the phone. Take care to leave enough cable for effortless manipulation.
Then, cut the insulation rubber layer with a stripper and remove it to make the inside wires visible. You can recognize four wire colors, including red, green, black, and white.
Remove the green and white wires, which are irrelevant for data transfer, and keep negative black and positive red ones. Unfortunately, the entire process is useless if the cord doesn’t have the black wire.
The next step is to cut off about 0.40 inches (1 cm) of the rubber and remove it until exposing the copper wires. Then, insert the black wire into the metal circular hole at the cart bottom and tie the red one to its outside metal surface.
Finally, plug the USB end into a power bank, computer, laptop, or charging adapter. You should hear the buzz, meaning the fluid has started heating immediately.
Now, you can start inhaling, but be careful. The vapor released from the cart in this way is often stronger and more intense than usual. The reason is that this cord has a higher power (5 volts) compared to the 1.5 volts standard for the cart battery.
$34.99$14.99 (Free Shipping, 2-6 Days Delivery)
- Full-Screen Display
- Smooth & Boost Adjustable Two Models
- 25ml E-liquid Capacity
- 50mg Strength
- Up to 20000 Puffs
2. iPhone charger cord
Be aware that the design of Apple cords is more complex, plus they have wires with a sturdier outer covering than in Android models. However, using them to hit a vape cart when necessary is still possible.
This option is too complicated for most vapers, so it is better to avoid it whenever possible. It is particularly an unsuitable option when you are in a hurry or impatient by nature.
The first thing to do is to prepare the iPhone cord and check it carefully. Avoid using damaged ones because they can cause electrical issues. The following steps are similar to the process of using the Android cable.
Start with cutting off the charging port and remove the rubber until you get four wires of the same color. Remove the irrelevant white and green wires and the outer covering from the red and black ones.
This phase is challenging because of the sturdy outer iPhone cord layer. Besides, there are chances to unintentionally cut off exposed copper wires, which requires repeating the entire procedure.
Once you finish, it is time to connect the black wire to the hole of the vaping device and attach the red one to the outer surface. Finally, connect the cord to the Apple USB power adapter, laptop, or computer and enjoy vaping.
3. Lighter
Some experienced vapers claim that hitting a vape cart with a lighter is possible, but it is not a recommended practice. Bringing the flame close to the device’s bottom hole can be tricky, even dangerous.
Besides, there is a chance to contaminate yourself with smoke containing heavy metals or burn your hands. If you desperately need to vape, you can heat the bottom part by running the flame forward-backward and hitting a cart after a few seconds.
4. Laptop cord
Plugging a cord into the laptop USB and using it to hit a cart is possible, but it needs to be previously charged enough to power the USB slot.
5. Car USB charger
Some vapers use a car charger to power the vape cart’s coil by plugging a stripped USB cord. Putting the cart directly into the cigarette lighter is impossible and potentially dangerous. However, you can plug the cord into the adapter connected to it.
6. Wall charger
Never try to plug the cable into chargers installed directly to the wall because they provide a significantly stronger current. That way, you are at risk of damaging the cart and injuring yourself.
$34.99$14.99 (Free Shipping, 2-6 Days Delivery)
- Full-Screen Display
- Smooth & Boost Adjustable Two Models
- 25ml E-liquid Capacity
- 50mg Strength
- Up to 20000 Puffs
Reasons to Buy a New Battery
If these alternative procedures of hitting the vape cart sound insecure, risky, and complicated, you should avoid them. There are several reasons why buying a new battery is a better option.
1. Vape batteries are inexpensive
Even though 510-threaded vape batteries cost $100, you can buy most other models for only about $10 to $30. Since they typically last for months, there is no need to make things complicated.
Apparently, most vapers prefer spending their money on quality E-liquids rather than on batteries, but some alternatives are not worth the risk. All things considered, spending a few dozen dollars will pay off over time.
Besides, all these DIY things are often a temporary solution and can cause severe injuries if you are inexperienced. For instance, misconnecting wires can bring more problems than benefits.
Therefore, the best to do is to have a spare battery with you in case the current one runs out or breaks. Interestingly, the battery lifespan is not connected with its price. Most work during a similar period, and the differences are typically in their look.
Even purchasing a disposable dab pen is often better than experimenting with wires and electricity. Sometimes, making a slight but wrong move can cause your device to burn.
$34.99$14.99 (Free Shipping, 2-6 Days Delivery)
- Full-Screen Display
- Smooth & Boost Adjustable Two Models
- 25ml E-liquid Capacity
- 50mg Strength
- Up to 20000 Puffs
2. You can keep a few spare batteries on hand
Buying at least two batteries in advance and keeping them on hand can be convenient when one runs out. Luckily, vape batteries are inexpensive and can last for long. So, having a few spare ones in your home can quickly prevent inconvenient situations.
3. Hitting carts any other way is potentially risky
The best and most reliable way to hit a vape cart is to use an appropriate battery created for this purpose. Other methods can be helpful in emergency situations when other options are not at your disposal, but they are unreliable, potentially dangerous, and require skill and appropriate material.
4. It is a way to avoid the DIY work
If you are skillful and know what you are doing, using a cord to charge your vape device can get you out of a stressful situation. Be prepared that you need an adequate cord and a rubber stripper to reach the necessary wires.
The process can be demanding and time-consuming, from finding all the necessary supplies to attaching the right two wires to the required places. Besides, burnt distillate may jeopardize your health, and one wrong move can cause permanent damage to your vape device.
Manufacturers recommend avoiding this option, and you should try it only if you are in a hopeless situation. In this case, following the instructions is critical. If you are unsure about any part of the process, it is better to give up on time.
5. Your battery is old
Being aware of the vape battery’s lifespan can prevent unpleasant situations where it is unexpectedly emptied. The first sign your battery is old is a prolonged time to recharge the vape device.
Typically, standard charging lasts 60 to 80 minutes, and only a few sizable devices need more time to charge fully. Any drastic change in a usual period of charging duration is a warning of a performance decline.
Most vape devices use lithium-ion batteries that provide approximately 300 to 500 charges. So, be prepared that the time to replace the old battery is approaching when you reach this number.
$34.99$14.99 (Free Shipping, 2-6 Days Delivery)
- Full-Screen Display
- Smooth & Boost Adjustable Two Models
- 25ml E-liquid Capacity
- 50mg Strength
- Up to 20000 Puffs
Summary
Many vapers have an extra battery set in case of need. That makes DIY options for powering vapes unnecessary and prolongs their life by avoiding inadequate solutions.
If you desperately need the vape when the battery is empty, or the charger is unavailable, you can use an Android charger or cut-up USB cable instead. Be careful because it is not a good idea for long-term use.
