Vape devices are a convenient and healthy alternative to smoking. You can recognize two available device types – disposable and refillable. While disposable models are more practical, refillable ones are more affordable because you can use the same device for a long.
Refillable models are also more eco-friendly, meaning you use the same device for a while and only change E-liquid. Besides, they allow you to try different flavors after discovering how to refill a vape cart step by step. Let’s check the procedure!
How to Refill Vape Cartridge?
Besides, the advantage of this option is to save money. Be aware that refilling the same device several times is more affordable than buying new vape pens and throwing them away as soon as they are empty.
Refilling the vape cart is an uncomplicated process. The first step is to choose a desired E-liquid and provide the necessary material. Then, you should disassemble the device, fill the cartridge, and reassemble everything. Piece of cake!
- Empty cartridge
- Syringe or eye-dropper
- Paper towel
- Paper clip
- Oil filler machine (optional when you have numerous carts to fill)
The first thing to do is to pull out the cart from the vape device and remove the mouthpiece by twisting it counterclockwise. It is sometimes necessary to rotate it twice or three times or even use a paper clip to open the cartridge.
If it doesn’t go as expected, you may have a disposable vape device. In this case, every attempt to open it will probably end with the crack cartridge. Once you remove the mouthpiece, it is recommended to place it in a box to prevent it from getting damaged or lost.
The next step is to fill the cart with the chosen juice. First, check its capacity to prevent overfilling. Most models can hold 0.50 or 1 ml of E-liquid.
Then, fill a syringe or eye-dropper with juice and push its tip into the cart. Fill it to the max line by letting it slowly drip along the wall. Be sure to fill the small hole, not the larger one placed in the center.
Avoid disconnecting the cartridge from the battery to make it easier to hold and reduce the possibility of accidents. Finally, it is time to cap the cart.
This step includes the mouthpiece screwing on the initial place. If you need to replace it, do it now. Gently twist it around clockwise and check whether it is tightly attached. Never do it too rough to prevent possible breaking of this fragile part.
The final thing to do is to wipe the device and remove possible spilled drops of E-liquid. Use a paper towel, clean the surface, and wait about 15 to 20 minutes before starting vaping. It is a crucial part because juice needs to settle.
How to refill a Dab Pen Cart?
Refilling cannabis vape carts offers a few advantages, but it also has its disadvantages.
For instance, you can try this option when you want to customize your device and improve your vaping experience by choosing various flavors and a wider THC oil range. Besides, you can experiment with different strains more effortlessly.
Refilling is also a convenient, cost-effective, and environmentally sustainable solution that provides variety and flexibility. It is a familiar and consistent option and doesn’t require advanced skills but can save you some money.
On the other hand, refilling marijuana vape carts can be inconvenient for some users and a source of errors. For instance, you can face a risk of leakage, overfilling, potential contamination, and improper device assembly after refilling.
There is also a possible incompatibility with some cart models, and the process requires patience, preparation, and some practice. Finally, refillable carts can correctly function only when you maintain them regularly.
If you don’t mind the downsides and want to take advantage of this procedure’s benefits, you can try to do it. Prepare everything you need, follow instructions, and be careful to protect yourself and keep the device undamaged.
- Cannabis vape oil (medical cannabis distillate)
- Empty oil cart
- 14- to 16-gauge blunt-tip needle
- Heating source (bowl of hot water or hairdryer)
- Empty flacon
- Plastic bag
- Vise grip
- Clean cloth or paper towel
- Oil filler machine (optional when you have numerous carts to fill)
Let’s do it!
First, choose the desired oil or cannabis concentrate, but ensure it is of high quality and adequately stored. Then, prepare the device for filling and heat the oil if necessary. Your best options are a hairdryer or a warm water bath.
Be careful since it should be warm but not hot. In most cases, the heating should last about 20 to 30 seconds. The goal is to make it more fluid, but the heat level should depend on the initial oil viscosity. An approximate optimum is 100 to 140 F (37.8 – 60 C).
Then, add terpenes in approximately 5% to 15% of the pure distillate amount to get the desired oil viscosity. Otherwise, it will be too diluted and thin. Adding terpenes is critical because they are broken down during distillation. The best option is to choose cannabis-derived terpenes or those labeled CO2.
Prepare the cart by disconnecting it from the battery to prevent it from damaging and protect hands from burns. Secure the cartridge base with the vise grip, twist off the mouthpiece with a pliers, and remove it.
If you find it impossible to twist off the mouthpiece, the probable reason is oil residue. Hardened oil sometimes sticks to the surface and prevents this part from being removed. In this case, the best to do is to warm the cart to loosen the oil.
Then, gently unscrew the mouthpiece counterclockwise until removing it. Since not all vape devices are the same, you should check the instructions to find the right approach to opening this part and prevent it from cracking.
Extract the oil from a bottle with a syringe, but take care to avoid pulling air to prevent the creation of undesired air bubbles. In this case, it is necessary to attach the blunt tip needle and fasten it with the leur lock to draw up the precisely determined amount of oil.
Now, it is time to refill the empty cartridge. Insert the needle into the cart and slowly inject the oil inside. Carefully monitor the oil level because it is the best way to prevent adverse effects on the cart’s performance and avoid possible leaking.
Reassemble the cartridge after filling it completely, and take care to do it within a minute or two. Screw back the mouthpiece in a clockwise direction and attach the cartridge to the battery. Being gentle is crucial in this case to avoid breaking this piece.
Leave the filled cartridge stand vertically for at least half an hour before use to allow the heating element to absorb enough oil. Finally, you should carefully clean spills with a clean cloth or paper towel.
How to Refill the Vape Device Correctly?
Even though refilling vape devices is a relatively effortless task, you should be careful and patient while doing that. Remember that following instructions is the only way to avoid undesirable consequences and remain unsatisfied with a result.
1. Prevent possible spills
Be careful to avoid spilling the oil while taking it out of the bottle and during injection into the cartridge. Any carelessness results in wasted money, extra cleaning, and frustration over delayed enjoyment.
2. Be patient and never rush
This task is relatively effortless but requires patience and time. There is no need to spill pricey concentrates and cause device damage in an attempt to save a few minutes.
3. Check the light
Keep the room well-lightened while refilling the cart. It helps to spot all the details and prevent undesired overfilling.
4. Avoid overfilling the cart
If you mistakenly overfill the cartridge, it forces the device to work harder. In most cases, such a thing leads to burning out or clogging.
5. Prevent leaking
Carefully return a mouthpiece after each refill. Take care to screw it tightly in the initial place to prevent possible leaking. On the other hand, it is critical to be gentle to avoid breaking this delicate device part.
6. Regular maintenance
Regularly clean your vape device before refilling it and remove spilled drops after the job is done. Otherwise, you may face a problem with building up concentrates that become sticky over time. A resulting clogging will prevent your complete enjoyment.
Refillable vape carts are practical, convenient, eco-friendly, and affordable options for many vapers. If you have a good-quality battery, you can save money by refilling vape cartridges when needed. Besides, this option allows you to change juices with different flavors, making the vape experience even better.