In the vape marketplace, SMOK vapes stand at the pinnacle of high performance and better vaping experience.

But like most modern gadgets, these vapes fall victim to common issues and occasional glitches. So in such situations, you should know how to reset your SMOK vape.

To begin resetting your SMOK vape, you first need to locate the reset button and simply press it for 10 seconds. But what if the SMOK vape model lacks a reset button?

Worry not! This article will address other effective ways to reset your SMOK vape to enhance its performance. Moreover, it sheds light on typical problems you might encounter when using your device and offers methods to resolve them.

Read on for a clearer understanding!

How to Reset SMOK Vape

When is a SMOK vape reset necessary?

Sometimes, resetting a SMOK vape can help you troubleshoot a variety of device issues and restore it to its original setting (like you’ve just got it from the shop). Some of the few reasons you might need to reset your hardware include:

• Fixing malfunctions: Occasionally, software problems may cause your gadget to malfunction. But a simple reset could help restart the system and clear any temporary bugs.
• Adjusting settings:  Your device reset feature can revert it to its default settings, for example, if you or someone else made adjustments that aren’t working out.
• Updating Firmware: In some cases, it’s necessary to reset your SMOK vape before and after updating its firmware, so the update installs correctly.

Step-By-Step Guide to Reset Your SMOK Vape

The most recognized method of resetting a SMOK vape includes the following steps:

1. Switch off Your Device: The first step to any reset is to turn off your gadget. The same rings true for SMOK vape. So, power down your device by clicking the fire button five times, subsequently.
2. Find the Reset Button: Depending on the model, some can include a tiny reset button, which appears as a small hole in the vape’s side or base.
3. Press and Hold the Reset Button: Among your processions, locate a paper clip or pin and gently press the reset button for at least 10 seconds.
4. Turn on the Device: Press the fire button five times to power on your device.

Additional Ways to Reset SMOK Vape

1. Reset the Tank

If you can’t locate the reset button on your SMOK vape, there’s no need to panic. You can still reset the device by removing the tank from the mod and screwing it back.

This method works perfectly for those vapers who have ever dealt with the “ohms too high” or “ohms too low” error.

How do you go about it?

First, unscrew the tank on the SMOK mod. Clean the connectors with a cotton swab dipped in isopropyl alcohol and remove any residue or buildup on the pins, connection, and outside the tank. Don’t forget to replace the coils if they are worn or damaged.

Once you have done that, click the fire button on the mod. Simply press it once and don’t hold. From there, screw the tank back on top of the mod. Lastly, answer the question “Is This A New Coil?” correctly.

If you installed a new coil, select “Y” (Yes) and “N” (NO) if you retained the same resistance coil as before.

2. Reset the Puff Counter

In addition to the vape tank, some SMOK products allow you to reset the puff counter or the feature that counts how many puffs you have taken.

If you have SMOK vape with a touch screen, e.g. SMOK G-Priv 2, head to the Menu or settings icon to access the resetting option.

For those using devices like SMOK Mag, Procolor, or Alien, tap the fire button 3 times to launch the menu.

For those that use SMOK products without an elaborate full-screen menu, you can reset the puff counter by tapping the Fire and Down buttons in unison.

Once you’ve opened the puff settings or menu, select “Puff Clear” or “Puff Reset” by holding the fire button until either option activates.

With these options, you can reset your puff count to zero or increase the puff settings.

3. Factory Resetting the SMOK Vape Pen

As a last solution to your issues, you can factory reset your vaping device. Simply, take out the batteries from the mod. Then, click and hold all the buttons on the mod.

And the final step – put back the batteries into your mod.

Why is My SMOK Vape Not Working?

Ideally, your SMOK vape should operate flawlessly after adjustments and tackling standard problems. However, reality may be less ideal.

If your SMOK vape is still not puffing out vapor after resetting, you may want to look into the device’s power level. Ascertain if your gadget has sufficient juice power to last your vaping sessions.

Confirm the coil’s integrity and its secure connection and validate the tank’s e-liquid supply, too.

Additional SMOK Vape Issue Worth Highlighting

1. Tank Leakage

A  tank could leak if its assembly is shoddy or surplus e-juice is loaded. Fixing this issue entails proper installation of the rings and avoiding an overflow of e-juice.

2. Resistance Issues

If your display shows ‘ohms too high’ or ‘ohms too low,’ your device is experiencing resistance problems. To remedy this, cleanse all connectors and mount the coil correctly. A reset of resistance detection may also be necessary.

3. Device Failing to Turn On

When you press the power button but the device fails to turn on, plug in the device to a power source and leave it to charge until it’s full.

Then again, you can remove the batteries and arrange them correctly in their compartments. Experts also recommend long pressing the power button, and turning the vape on and off a few times.

4. Coil Detection Error

The coil detection error occurs when your screen reads ‘no coil detected.’ This can result from a faulty coil or poor installation.

To rectify this error, install the coil correctly, and avoid crossing threads. Also, make sure to appropriately put together each component of your tank. Should the problem persist, a new coil installation might be necessary.

How to Reset SMOK Vape Password

The security code of your device protects it and stops unauthorized usage. Although, one can easily misplace such a code, particularly when handling multiple devices.

Refreshing your SMOK vape security code is straightforward. Head over to your service provider’s website and look for the ‘refresh password’ option. Provide your email to receive a new code.

How to Reset SMOK Nord Vape

In order to refresh your SMOK Nord vape, simultaneously press the ‘fire’ and ‘down’ buttons. Once the device is off, take out both the battery and tank prior to integrating a new coil.

After securing the fresh coil, reinstall the tank and slide the battery back in, then restore the other components as previously indicated.

How Do I Reset My Vaporizer to Factory Settings?

Let’s say, for instance, you’d want to switch from mouth-to-lung to direct-to-lung vaping or boost the maximum puff count. This new setting can be done by returning your device to its original factory settings before fine-tuning it to the chosen new settings.

Most devices usually allow resetting to factory defaults by removing the battery and toggling the on/off buttons together. After your mod returns to factory settings, personalize it to your desired settings.

How Do You Turn Off a Vape SMOK?

You ought to shut down your hardware when idle. Leaving it on can lead to reduced battery life. Moreover, overuse might overheat the coil, resulting in burnout.

So how do you switch it off?

Simple – hit the power button 5 times, and the instrument will power down.

How to Maintain Your SMOK Vape After Reset

For the best performance, you must keep your vape in good working condition. You can do this through the following steps:

1. Always Clean Up

Accumulation of debris on various parts of your SMOK vape could affect its performance. The common culprits are dust and vape juice particles on the tank and coil. The tank should be cleaned in warm soapy water, while a clean cloth should be used on the mod.

2. Coil Checks

The coil plays a big role in producing high-quality vapor. Therefore, regular checks and replacements are essential, mainly if there’s low vapor production or a burnt taste. At this point, it’s time to review your resistance or switch the coil.

3. Proper Storage

Correct storage practices will extend the lifespan of your SMOK vape. Avoid placing your gadget in areas with high temperatures, as the e-juice can thin and leak out of the pen. Proper storage also prevents accidental damage.

Conclusion

As we wrap up, knowing how to reset your SMOK vape is crucial for an outstanding vaping experience. The reason is that resetting the device can help solve software glitches, coil resistance errors, and even power issues. It also ensures your device stays in tip-top shape.

But remember, the resetting process differs from one SMOK device to another. Therefore, review the manufacturer’s manual to learn about the specific process for your device.

That’s all for now. Any questions? Please share them below!

Sharing is caring!