If you are an avid vaper, you probably heard about Lost Mary vapes. Reliable, easy to use, compact, and wide selection of flavors are just a few perks these popular vapes offer.

To top it off, these devices favor both beginners and avid vapers. It also caters to the needs of individuals who desire to quit smoking.

But despite all these amazing advantages, Lost Mary is an electronic device. That means it’s not damage-proof.  Occasionally, you might deal with leaks or the taste of burnt e-juices.

Perhaps the most bothersome issue is the Lost Mary not charging. In most cases, the main culprit behind this problem is a damaged battery. However, research shows there are other several potential culprits.

So, stay with us while we point out and reveal the villains responsible for your Lost Mary not charging situation.

Lost Mary Charging light Color Meanings

like Most vapes have a light that indicates the battery level or charging status. Common Lost Mary Charging light colors and meanings are:

• Red – Battery low
• Blue – Battery mid-level charged
• Green – Battery fully charged
• Flashing – Actively charging

If the light is flashing but not turning solid, it usually means there is an issue with the connection to the charger. Make sure the vape is properly connected.

Some vapes will show a red light even when fully charged. This is normal. The light is just indicating it is no longer actively charging.

If the light doesn’t come on at all, the battery may be drained too low to activate the light or there may be an issue with the vape. Try a different charger and cable if possible.

Refer to the specific vape’s manual for accurate information on that model’s charging light meanings and troubleshooting. The manual should explain what the different colors/blinking means.

Reasons Why Your Lost Mary Isn’t Not Charging

1. Battery Issues

If the battery is so low or completely depleted, it may take some time before it gets some juice and powers up the charging indicator.  However, if the device doesn’t charge within a couple of minutes, it’s time to get a new vape, especially if yours is disposable.

A faulty or malfunctioning vape battery might also not hold enough charge whenever you connect your device to the power source.

2. Damaged Charging Cable

Another cause of charging issues in Lost Mary is a damaged charging cable. A frayed, damaged, or bent cable can restrict the flow of sufficient power to your gadget. Sometimes, it can create a poor connection with the adapter and prevent voltage flow.

3. Dirty Charging Port

Like the charging cable, a clogged or damaged charging port can affect how the hardware picks up the charge. A few things that can clog or block the charging port include dust, debris, and lint.

4. Moisture Issues

Like most electronics, vapes don’t work so well when exposed to moisture. When any of its components, such as the charging port and battery come in contact with water, it could short-circuit.

This is why vape makers always tell users to store their devices in a dry environment.  And if it gets wet, let your gadget dry up before plugging it back into the power supply.

5. Overheating

Most reputable vape brands include anti-heating mechanics within their hardware. It’s a security measure that prevents the device from being damaged by excessive heat.

This safety feature prevents the vape from charging whenever the heat goes beyond the recommended limit.

If you undermine the charge of the battery, you might reduce the battery’s capacity and affect its ability to store charge. Should you continue, your vape will eventually stop charging.

How To Fix Lost Mary Not Charging?

Considering the issues mentioned above, it’s important for vapers to follow a troubleshooting procedure to identify the cause and fix the Lost Marry problem.

Here are some of the best ways to fix your Lost Mary Vape charging problem and extend your device lifespan significantly.

1. Clean the Charging Port

How many times do you carry your Lost Mary vape with you? Where do you often keep it?

Most probably, it’s in your pocket, right?

If so, lint, dirt, and dust can accumulate in the charging port. Over time, this buildup can prevent the USB charger from making a connection with the metal connectors. It can also damage other internal components forcing you to repair or replace your device.

So, check your device’s charging port for signs of dirt or dust accumulation. If it appears dirty, take a toothpick and gently remove the buildup. A toothbrush can also help you clean the port, but be careful not to damage the port.

We don’t recommend using a metal tool or wire to clean the port as it might scrap away parts of the delicate metal detectors and prevent damage.

Easy Cleaning Procedure on Lost Mary Charging Port

Step 1: Gather your materials such as a toothpick, soft-bristled brush, and cotton swabs along with rubbing alcohol and perhaps a can of compressed air.

Step 2: Shut off your vape and unplug any charging cables.

Step 3: Carefully brush the charging port to dislodge any dirt or dust that may be trapped in there. You want to put slight pressure on the brush, but not enough to damage anything.

Step 4: This is where the aerosol can of compressed air enters. Use it to blow away all the debris that is left, but make sure not to blast the port with liquid from a can.

 Step 5: Clean the inside of the charging port using a cotton swab dipped into rubbing alcohol.

Step 6: Wait for the port to dry before charging you vape.

2. Use a Different Power Source

Sometimes, the charging issues could be caused by something as small as a faulty power source. Maybe your wall socket is not working or it produces a low voltage not sufficient to power up the vape.

For such a case, consider using an alternative power source like a power bank or your laptop. Simply, connect your vape to your laptop via a USB cable, and within a few minutes, it will start to charge.

3. Change your USB Cable or Adaptor

If there’s nothing wrong with the wall socket, it’s time to check the vape’s USB cable as well as the charging adaptor.

The first thing you should do is check the USB cable for signs of wear or damage. Fraying and damage can prevent the device from picking up charge. The same rings true if you use the wrong cable to charge the device.

Contrary to belief, USB cables are not the same. We bet you have seen cable with white, black, and blue connectors. These vary depending on their compatibility, efficiency, and charging speeds.

USB with white connectors have low charging speeds. If you charge your device, expect it to take a long time to charge. A blue connector indicates that the cable provides about three times greater speed of charging, and in this case, your device will charge at a higher rate.

A high-quality, thick, and short cable is ideal for your device to charge faster and more efficiently.

Second, make sure it’s compatible with the charging port of your device. We encourage the use of original charging cables or those recommended by manufacturers. The same applies to the adapters as well.

How To Charge the Last Mary Vape Properly

Have you familiarized yourself with the troubleshooting techniques above?

If your device still does not charge, you might be looking at hardware issues.  For these, you will  have to contact the vape’s manufacturer or professional for repair or further assistance.

That said, let’s now look at the best strategies for charging your Lost Mary.

1. Incompatible cables can lead to several problems – one of them being the device failing to charge.  So, always stick to the brand’s charging cable or reliable third-party alternatives.
2. Ensure your device does not get too much or too little voltage from your selected power source. To avoid voltage fluctuations during charging (it could short-circuit the device’s components), opt for charging your device using a power bank or your laptop.
3. The LED indicator tells you how much battery life your device has. If it’s depleted, expect it to light red. When charging, the light could blink green. At full charge, the light could change to white or turn off.
4. Don’t leave your Lost Mary connected to power once it reaches its maximum charge. Or else, the battery could build up heat, which can damage it.  Charging your device for a short period is also not advisable. The battery’s capacity and life could suffer a serious blow.

How Long Does It Take to Charge Lost Mary?

The time a Lost Mary takes to charge will entirely depend on what model you currently own.  But in most cases, the charging time goes hand in hand with the battery capacity.

In simple terms, if your device has a battery with a higher capacity, it might take longer to charge.

To answer your question, it should take about 30 minutes for a vape pen to reach full battery charge. But some Lost Mary rechargeable vapes can charge for 1 to 2 hours to complete their charging cycle.

If the battery takes longer to charge than usual, you might be having a damaged or worn-out battery problem. The only solution is to get a replacement immediately.

How Many Times Can You Charge a Lost Mary?

Before we go, it would be wise to discuss how many times you can charge your Lost Mary.

If you have ever used rechargeable batteries, it means you know that at one point they lose their ability to hold a charge.  The same thing happens for vapes with these kinds of batteries.

You can charge your Lost Mary vaping device several times until the vape juices get depleted.

So, the number of times you can charge your device will depend on its e-liquid capacity – the more the e-liquid the longer the vape will last.

Generally, most rechargeable vaping hardware from Lost Mary can be charged 5 to 6 times throughout their lifetime.

Final Words

Your Lost Mary stopping to charge is not something new. Many people have encountered this issue, meaning there are several available solutions.

But first, you must identify the potential cause of the problem. Based on the information above, it could be a damaged battery, depleted battery, or dirty charging port.

Once you’ve identified the culprit, follow the tips above to fix it and return your device to its normal functioning condition.

That marks our article for the day.

Got any queries for use? Our comment section is always open!

Sharing is caring!